- A 1U box switch bears 48 gigabit ports, 8 10G ports, which is considered the highest port density in this industry. It adopts the high performance ASIC switch chip, which can meet the requirements of all kinds of complicated application sites.
- This switch series supports industry-level EAPS and their protection shift time is less than 50ms. Their high reliability is represented by the null packet loss, which has been proved by many years of application in the Grid, rail transportation and defense systems.
- Supporting the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP/MSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers.
- Providing the perfect Ethernet OAM mechanism to monitor the network running status in real time for rapid trouble locating and detection.
- Having powerful ACL functions to access and control L2-L7 data based on physical port, VLAN, MAC, IP and protocol port ID, and providing carriers flexible and various policy control methods.
- Supporting In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade. Supporting various L2 multicast functions, including IGMPSnooping, fast-leave and trans-vlan multicast copy
- Supporting priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services.
- Providing flexible bandwidth control policies, supporting port-/flow-based flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of video, audio and data services..
- Supporting 8 priority queues by each port Supporting multiple queue schedule algorithms such as SP, WRR, or “P plus WRR”.
- Supporting the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, etc..
- Supporting Ping, Traceroute, Telnet, SSH, ACL and so like on the basis of IPv6, meeting IPv6 networks’ equipment management requirements and service control requirements.
Interface:
- Port: 48 GE TX ports, 8 10GE/GE autoadaptation SFP+ ports.
Performance:
- Backplane: 368 Gbps
- Forwarding Rate: 568 Mpps
- MAC 128K
- Switching Mode: Store-and-forward
- MAC exchange:
• Static configuration and dynamic MAC learning.
• MAC browsing and removal.
• Configurable aging time of the MAC address.
• Limited number of learnable MAC addresses.
• MAC filtration. Black-hole MAC list. - VLAN:
• Support 4K VLAN entries
• Support GVRP
• Support 1:1 and N:1 VLAN Mapping
• Support QinQ and flexible QinQ
• Support PVLAN - Multicast:
• Support IGMP v1/v2/v3, PIM-SM, PIM-DM
• Support IGMP Snooping, MVR, IGMP filter.
• Support IGMP Fast Leave
• Support multicast group strategy and quantity limitation.
• Support multicast flow copying over VLANs. - STP:
• Support 802.1D (STP), 802.1W (RSTP), 802.1S (MSTP)
• Support BPDU protection, root protection and loopback protection - IPv4:
• Support Static routing, RIP v1/v2, OSPF, BGP, PBR, ECMP.
• Support strategy routing.
• Load balance by equivalent routing.
• Support BFD for OSBF, BGP. - IPv6:
• Support ICMPv6, DHCPv6, ACLv6, IPv6 Telnet
• Support IPv6 Neighbor Discovery
• Support Path MTU Discovery
• Support MLD v1/v2
• Support MLD Snooping
Tham khảo cấu hình sản phẩm theo link sau: Manual Configuration